Text Mode Use Http Proxy On Linux 1

SSH Tunnel On Linux Over Http Proxy

甚麼是 SSH Tunnel?其實我在以前的文章也介紹過,網路上的資源也相當豐富,設定方法不只在之前的文章有提到,網路上的教學也是到處都是,在 Linux 中設定 SSH Tunnel 其實也不會太難,-D 和 -R 的參數網路上教學文章也不少,只是透過 http proxy 再連出去的文章就比較少了,我先前的文章 SSH Tunnel 帶你遨遊 內介紹的是利用 putty 先連過要認證的 http proxy,之後在利用特定 ip 連線後轉 port  的方式來達到可以成功 ssh,只要能 ssh 連線的話建立 SSH Tunnel 私密通道也不會是啥大問題。

前段文章提到 ssh command -D 和 -R 的參數應用,這兩個參數的應用都是在可以直接 ssh 後的進階運用,若今天一切的連線都只能透過 http proxy 出去的話,要建立通道就不是那樣的簡單,而且網路上得中文資源不足,我稍微研究之後在此跟大家分享一些心得。

這次練功所要用到的軟體是 ProxyTunnel,比較可惜的是在 Ubuntu 上無法直接安裝,若是 RedHat 系列的話還有快速的 RPM,所以今天只好自己編譯安裝囉,相信自己編譯安裝不是那麼可怕的!

(此時好死不死這篇文章就此撰寫停頓,這個編譯我搞哩好久,後來問題還是出在一些編譯的軟體身上,開發套件果然還是都裝一裝比較好,編譯就比較不會有問題。)

把簡易的資訊列出來給大家看下,讓家知道到底有哪些參數可以利用
$ proxytunnel
Proxytunnel 1.8.0 (rev 0)
Copyright 2001-2007 Proxytunnel Project
Jos Visser (Muppet) <[email protected]>, Mark Janssen (Maniac) <[email protected]>

Purpose:
  Build generic tunnels trough HTTPS proxy's, supports HTTP authorization

Usage: Proxytunnel [OPTIONS]...
   -h         --help              Print help and exit
   -V         --version           Print version and exit
   -i         --inetd             Run from inetd (default=off)
   -a INT     --standalone=INT    Run as standalone daemon on specified port
   -e         --encrypt           Encrypt proxy<->destination using SSL
   -E         --encrypt-proxy     Encrypt client<->proxy (proxy talks SSL)
   -x STRING  --proctitle=STRING  Set the process-title to STRING
   -p STRING  --proxy=STRING      Proxy host:port combination to connect to
   -d STRING  --dest=STRING       Destination host:port to built the tunnel to

Parameters for proxy-authentication (not needed for plain proxies):
   -u STRING  --user=STRING       Username to send to HTTPS proxy for auth
   -s STRING  --pass=STRING       Password to send to HTTPS proxy for auth
   -U STRING  --uservar=STRING    Env var with Username for HTTPS proxy auth
   -S STRING  --passvar=STRING    Env var with Password for HTTPS proxy auth
   -F STRING  --passfile=STRING   File with credentials for proxy auth
   -N         --ntlm              Use NTLM Based Authentication
   -t STRING  --domain=STRING     NTLM Domain (default: autodetect)
   -r STRING  --remproxy=STRING   Use a remote proxy to tunnel over (2 proxies)
   -H STRING  --header=STRING     Add STRING to HTTP headers sent to proxy

  If you don't provide -s or -S you will be prompted for a password.

Miscellaneous options:
   -v         --verbose           Turn on verbosity (default=off)
   -q         --quiet             Suppress messages  (default=off)

Examples:
Proxytunnel [ -h | -V ]
Proxytunnel -i [ -u user ] -p proxy:port -d host:port [ -v | -q ]
Proxytunnel -i [ -U envvar ] -p proxy:port -d host:port [ -v | -q ]
Proxytunnel -a port -p proxy:port -d host:port [ -v | -q ]
若想仔細瞭解這些參數的話可以慢慢研究,我想可以研究的可多哩!

使用的方式大家可以到官方頁面去參考,相信裡面的資訊應該是挺豐富的,我這裡要回到主題上的 SSH Tunnel On Linux Over Http Proxy,前一篇文章有提到 Text Mode Use Http Proxy On Linux ,若設定 ssh 利用 http_proxy 來連線有前篇文章簡單就好了,可惜就是沒有 ssh_proxy 的設定可以利用,因此要自己要在做一些特殊的設定。

ssh 有幾個簡單的設定檔,/etc/ssh/sshd_config 是給 ssh server 用的設定檔,/etc/ssh/ssh_config 是給連線出用的設定檔,個人家目錄的設定檔得寫在 ~/.ssh/config,這檔案不會自動產生得自己去寫才可以,以下設定是參照這裡

$ cat config
#自己設定一個 port 給建立 tunnel 後來 listen
DynamicForward 8080
ProxyCommand proxytunnel -v -u 帳號 -s 密碼 -p 需要帳密的代理伺服器:port -d %h:%p -H "User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)\n"
ServerAliveInterval 30

要測試看看連線嘛?當然要啊~不然設定幹嘛?

$ ssh wawa@遠端ssh
伺服器 -p port
Proxy basic auth is dmRjaGlhaHNpbmxpdTaaNDIxMDMwNg==
Connected to
需要帳密的代理伺服器:port (local proxy)
Tunneling to
遠端ssh伺服器:port (destination)
Connect string sent to local proxy:
-> CONNECT
遠端ssh伺服器:port HTTP/1.0
-> Proxy-authorization: Basic
dmRjaGlhaHNpbmxpdTaaNDIxMDMwNg==
-> User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)\n
-> Proxy-Connection: Keep-Alive
Data received from local proxy:
<- HTTP/1.1 200 Connection established
Tunnel established

之後輸入遠端ssh伺服器帳號密碼,若登入了就是 ok 囉

接下來當然也要驗證給大家看本機是有在 listen 自己設定的 8080 port 的

$ netstat -tnl | grep 8080
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN    
tcp6       0      0 ::1:8080                :::*                    LISTEN

以上的步驟來是要提醒大家一個重點,因為是透過 http proxy 連線的,若沒有開放 80 port 以外的對外連線,而你的 ssh server 又是開預設的 22 port ,那一定是連不到的唷!所以比較方便的方式是利用 iptable 的 redirect 的功能來轉 port,這方式也在先前文章 SSH Tunnel 帶你遨遊 內有提到,有需要在回頭看囉!

基本上這跟 windows 上連線的不同就在於 windows 內有 putty 可以用,putty 可以先設定連線方式,也就是可以輕鬆搞定 http_proxy 那個環節,在 linux 上我是還沒有看到類似 putty 類似的工具可以先設定連線方式再 ssh,於是才會透過 proxytunnel 的方式來進行連線,不知道看文章你的懂哩沒有?不懂也沒有關係,因為沒用到懂哩也沒用,需要時在查找就好,不然那麼多資訊文章哪裡記的住啊?對吧!


Text Mode Use Http Proxy On Linux 1 參考影音

繼續努力蒐集當中...

Text Mode Use Http Proxy On Linux 1 文章標籤

SSH Tunnel On Linux Over Http Proxy 相關文章

星火NEW直播: 最新 APK 下載

第四台業者會哭哭的~

TOP